ISO QJ1076 angular contact ball bearings

Fillet Radius ra:2.50 mm; d:100.000 mm; D:215.0000 mm; Oil Speed Rating n2:2600 rpm; Accessories:No Shield, no Seal,; Sealed Speed Rating n3:1800 rpm; Basic Static Radial Load Rating Co:255000 N; B:82.60 mm; Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:255000 N;

T:45.9 mm; Fatigue load limit Pu:0.335 kN; Hexagonal key size for grub screw N:3 mm; Mass bearing unit:0.37 kg; Thread grub screw G2:M6x0.75; Limiting speed:1500 r/min; Recommended tightening torque for grub screw:4 N·m; s1:26.9 mm; A:31 mm; A1:15 mm;

Basic Radial Load Rating-Dynamic DC:93600 N; Speed Rating-Open and Shielded-Grease OSG:12900 rpm; Basic Radial Load Rating-Static SCO:67000 N; Fillet Radius ra:2.00 mm; d:55.000 mm; B:29.00 mm; Type:300-RDM Series (from; D:120.0000 mm; Speed Rating-Open and Shielded-Oil OSO:18700 rpm; Fillet Radius

Oil Speed Rating n2:7600 rpm; Fillet Radius rb:1.00 mm; D:90.0000 mm; Grease Speed Rating n1:5800 rpm; Fillet Radius ra:1.50 mm; d:40.000 mm; Basic Dynamic Radial Load Rating C:71500 N; B:46.00 mm; Basic Static Radial Load Rating Co:61500 N;

Shielded or Sealed Co2:108000 N; D:160.0000 mm; Basic Static Radial Load Rating 15º Co1:143000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3400 rpm; B:60.00 mm; Width Plain C2:124000 N; Oil Speed Rating n2:4500 rpm; d:90.000 mm; Fillet Radius rb:1.00 mm;

Sealed Speed Rating n3:1300 rpm; Basic Dynamic Radial Load Rating C:216000 N; Grease Speed Rating Open/Shielded n1:1900 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:2400 rpm; Basic Static Radial Load Rating Co:245000 N; D:310.0000 mm; B:51.00 mm; Accessories:One Shield; d:200.000

da min.:493 mm; D:780 mm; ra max.:4 mm; r3,4 min.:7.5 mm; Fatigue load limit Pu:780 kN; Reference speed:560 r/min; Design variant/feature:NNUB.4/C4; Mass bearing:540 kg; B:280 mm; Basic dynamic load rating C:5610 kN;

Bearing limiting speed:4300 r/min; N1:22.225 mm; S:4.763 mm; ba:44.45 mm; Ca:64.795 mm; P120°:45.4 kN; Pa:12.5 kN; PG:1/8 NPT; Cap bolt recommended tightening torque:298.3 N·m; h:40.481 mm;

D2:48.1 mm; db min.:34.6 mm; Preload class B GB:150 N; Calculation factor f0:7.9; Static axial stiffness, preload class C:67 N/µm; rb max.:0.6 mm; Basic static load rating C0:5.2 kN; Calculation factor fHC:1.01; d1:38.2 mm; D:55 mm;

B:5.00 mm; Accessories:One Shield; d:10.000 mm; Sealed Speed Rating n3:20000 rpm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:930 N; Basic Dynamic Radial Load Rating C:1820 N; D:19.0000 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; Grease Speed Rating Open/Shielded n1:36000 rpm;

R1:31.5 mm; A1:16 mm; A:47 mm; Recommended diameter for attachment bolts, inch G:0.625 in; DN:6.5 mm; d:50.8 mm; Db2:127 mm; Basic dynamic load rating C:43.6 kN; N:18 mm; Hexagonal key size for grub screw N:4.763 mm;

D:95.0000 mm; d:60.000 mm; B:18.00 mm; Basic Dynamic Radial Load Rating C:35100 N; Basic Static Radial Load Rating Co:30000 N; Oil Speed Rating n2:22000 rpm; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:15000 rpm;

Grease Speed Rating n1:10000 rpm; Fillet Radius ra:1.00 mm; B:15.00 mm; Basic Static Radial Load Rating Co:10200 N; Oil Speed Rating n2:15000 rpm; D:52.0000 mm; Basic Dynamic Radial Load Rating C:15600 N; d:25.000 mm; Fillet Radius rb:0.60 mm;

F:165 mm; Mass inner ring:1.12 kg; d:150 mm; r, r1,2 min.:1.1 mm; B:40 mm;

Fillet Radius ra:1.00 mm; B:25.40 mm; Oil Speed Rating n2:12000 rpm; Accessories:Shield & Seal; d:20.000 mm; Basic Static Radial Load Rating Co:14600 N; Sealed Speed Rating n3:8500 rpm; D:52.0000 mm; Grease Speed Rating n1:8500 rpm; Basic Dynamic Radial Load Rating C:22500 N;